Oxygen Sensor 89467-0E240 for Toyota Sienna
894670E240 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| Imported Toyota | $73.90 | Check Better Price |
| Lexus | $73.64 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
| # | Brand | Model |
|---|---|---|
| 1 | Lexus | Lexus - United States/Canada - LEXUS RX450H/350(NAP - 201510 - GGL2#,GYL2 |
| 2 | Toyota | Toyota - General area - Senna: SIENNA - 201109 - 202009 - ASL30,GSL3 |
| 3 | Toyota | Toyota - General area - Highlander: HIGHLANDER/KLUGER - 201312 - 201911 - ASU50,GSU5 |
| 4 | Toyota | Toyota - Europe - Highlander: HIGHLANDER/KLUGER - 201312 - 201911 - ASU50,GSU5 |
| 5 | Toyota | Toyota - United States/Canada - Senna: SIENNA - 201001 - 202009 - ASL30,GSL3 |
| 6 | Toyota | Toyota - United States/Canada - Highlander: HIGHLANDER (NAP) - 201312 - 201911 - ASU50,GSU5#,GVU58 |
Product Overview
OE 89467-0E240 is the genuine Lexus OEM oxygen sensor (front) that measures exhaust oxygen or temperature for engine control. It is used on LEXUS RX450H/350, SIENNA, HIGHLANDER (NAP) and HIGHLANDER/KLUGER, built from 2010 to 2015. 5 cross-reference numbers apply, including 89467-48310, DOX-0573 and 234-9158.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 89467-0E240 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Front |
| Type | Air Fuel Ratio Sensor |
| Thread | M18x1.5 |
| Cable Length | 440mm |
| Wires | 4 |
| Connector | 4-pin |
OE Cross-Reference
| 89467-48310 | Toyota |
| DOX-0573 | Denso |
| 234-9158 | NTK |
| 811048 | Meat & Doria |
| 90646 | SIDAT |
Questions and Answers
Which Toyota or Lexus vehicles is 89467-0E240 used on?
89467-0E240 covers LEXUS RX450H/350, SIENNA, HIGHLANDER (NAP) and HIGHLANDER/KLUGER, with production years 2010 to 2015. Chassis codes include ASL30, GSL3#, ASU50, GSU5#, GVU58, GGL2#, GYL2#.
Which chassis codes does 89467-0E240 cover?
Chassis codes include ASL30, GSL3#, ASU50, GSU5#, GVU58, GGL2#, GYL2#.
What part numbers replace 89467-0E240?
Listed on this page are 5 interchangeable numbers for 89467-0E240, among them 89467-48310 (Toyota), DOX-0573 (Denso), 234-9158 (NTK), 811048 (Meat and Doria).
How can I verify that 89467-0E240 is a genuine Toyota part?
To verify this Oxygen Sensor (Front), look for the ten-character number 89467-0E240 on the box label together with the country-of-origin marking, then check that the connector face shows no moulding flash and the latch closes with a crisp detent, and that the OE supplier’s mark is moulded or etched on the component next to the Toyota number (DENSO on coils and sensors). We can provide the invoice, packing list and CoO for any order.
Where is 89467-0E240 installed on the vehicle?
It is fitted in the Front position.
How many pieces are needed for 89467-0E240?
Sold as one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
A few points before you fit it: Disconnect the battery negative terminal first and avoid touching the connector pins.
Is the genuine part worth it compared with an aftermarket equivalent?
What the genuine item buys you is concrete: the factory-keyed connector plugs straight into your harness with no adapters or rewiring; and the unit is calibrated to the factory signal range, so the ECU reads it without fault codes. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor (Rear Right) 89465-48240 for Lexus RX270
Oxygen Sensor 89467-58040 for Toyota Alphard
Oxygen Sensor 89467-33170 for Toyota Camry
Oxygen Sensor 89465-48110 for Toyota Highlander
