Oxygen Sensor 89465-48110 for Toyota Highlander
8946548110 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $79.75 | Check Better Price |
| GAC Toyota | $79.75 | Check Better Price |
| Imported Toyota | $79.75 | Check Better Price |
| Lexus | $79.49 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Product Overview
OE 89465-48110 is the genuine Toyota OEM oxygen sensor (rear) that measures exhaust oxygen or temperature for engine control. It is used on LEXUS RX300/330/350, LEXUS RX330/350 (JPP), HARRIER, HIGHLANDER (JPP) and HIGHLANDER/KLUGER, built from 2003 to 2007. 5 cross-reference numbers apply, including 89465-0E030, DOX-0109 and ADBP700021.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 89465-48110 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Rear |
| Type | Oxygen Sensor |
| Thread | M18x1.5 |
| Cable Length | 750mm |
| Wires | 4 |
| Connector | 4-pin |
OE Cross-Reference
| 89465-0E030 | Toyota |
| DOX-0109 | Denso |
| ADBP700021 | Blue Print |
| 175843 | Febi Bilstein |
| 33106769 | SWAG |
Questions and Answers
Which Toyota and Lexus models does 89465-48110 fit?
Genuine Toyota Oxygen Sensor (Rear) 89465-48110 is used on LEXUS RX300/330/350, HARRIER, HIGHLANDER (JPP) and HIGHLANDER/KLUGER, built from 2003 to 2007. Chassis codes include ACU3#, GSU3#, MCU3#, ASU40, GSU4#, GVU48, MHU48, GSU35.
Which chassis codes does 89465-48110 cover?
Chassis codes include ACU3#, GSU3#, MCU3#, ASU40, GSU4#, GVU48, MHU48, GSU35.
Which OEM part numbers interchange with 89465-48110?
5 interchangeable part numbers are listed for 89465-48110, including 89465-0E030 (Toyota), DOX-0109 (Denso), ADBP700021 (Blue Print), 175843 (Febi Bilstein).
How can I verify that 89465-48110 is a genuine Toyota part?
To verify this Oxygen Sensor (Rear), look for the ten-character number 89465-48110 on the box label together with the country-of-origin marking, then check that the cable entry into the sensor body is sealed by a moulded rubber grommet and the body itself carries the moulded OE number, and that the retail number appears only on the box and the sealed bag, while the sensor body shows only an internal identification code. We can provide the invoice, packing list and CoO for any order.
Where is 89465-48110 installed on the vehicle?
It is fitted in the Rear position.
How many pieces are needed for 89465-48110?
Supplied as one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
Yes. Disconnect the battery negative terminal first and avoid touching the connector pins.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part earns its price in details that matter over time: the factory-keyed connector plugs straight into your harness with no adapters or rewiring; and the unit is calibrated to the factory signal range, so the ECU reads it without fault codes. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor (Rear) 89465-42170 for Toyota RAV4
Oxygen Sensor 89465-0G100 for Toyota Land Cruiser Prado
Front Oxygen Sensor 89467-35100 for Toyota Land Cruiser Prado
Oxygen Sensor 89467-33090 for Toyota Camry
