Oxygen Sensor 89467-58060 for Toyota Alphard
8946758060 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $74.08 | Check Better Price |
| GAC Toyota | $74.08 | Check Better Price |
| Imported Toyota | $74.12 | Check Better Price |
| Lexus | $73.86 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Product Overview
OE 89467-58060 is the genuine Toyota OEM oxygen sensor (front right) that measures exhaust oxygen or temperature for engine control. It is used on ALPHARD/VELLFIRE/HV, ALPHARD/VELLFIRE/HYBRID and LEXUS LM350/LM300H, built from 2008 to 2020. 5 cross-reference numbers apply, including DOX-0611, 97734 and 570329A.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 8946758060 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Front Right (Bank 1 Sensor 1) |
| Type | Air Fuel Ratio Sensor |
| Thread | M18x1.5 |
| Cable Length | 500mm |
| Wires | 4 |
OE Cross-Reference
| DOX-0611 | Denso |
| 97734 | NGK |
| 570329A | ERA |
| 75645 | FAE |
| 3922L0549 | Ridex |
Questions and Answers
Which Toyota or Lexus models and years does 89467-58060 cover?
89467-58060 fits ALPHARD/VELLFIRE/HV and LEXUS LM350/LM300H, built from 2008 to 2020.
What is the cross-reference for 89467-58060?
5 numbers interchange with 89467-58060, including DOX-0611 (Denso), 97734 (NGK), 570329A (ERA), 75645 (FAE).
How can I verify that 89467-58060 is a genuine Toyota part?
To verify this Oxygen Sensor (Front Right), look for the ten-character number 89467-58060 on the box label together with the country-of-origin marking, then check that the housing is laser-etched with a deep, sharp part number rather than carrying a printed sticker, and that the connector has the factory-keyed pin count and latch geometry that only one position on the harness accepts. We can provide the invoice, packing list and CoO for any order.
Where is 89467-58060 installed on the vehicle?
It is fitted in the Front Right (Bank 1 Sensor 1) position.
How many pieces are needed for 89467-58060?
You get one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
Worth knowing first: Disconnect the battery negative terminal first and avoid touching the connector pins.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part differs in ways that show up in service: the factory-keyed connector plugs straight into your harness with no adapters or rewiring, and the unit is calibrated to the factory signal range, so the ECU reads it without fault codes. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor Rear 89465-48170 for Toyota Kluger
Oxygen Sensor (Rear) 89465-48250 for Toyota Highlander
Oxygen Sensor 89465-0G100 for Toyota Land Cruiser Prado
Oxygen Sensor (Rear) 89465-0R070 for Toyota RAV4
