Oxygen Sensor 89467-30030 for Toyota Crown
8946730030 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $71.70 | Check Better Price |
| GAC Toyota | $88.99 | Check Better Price |
| Imported Toyota | $97.92 | Check Better Price |
| Lexus | $97.57 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 19 mapped vehicle models
Product Overview
The genuine Lexus oxygen sensor (front right), OE 89467-30030, measures exhaust oxygen or temperature for engine control. It fits LEXUS GS SERIES, LEXUS GS30/35/43/460, LEXUS GS460/430/350, LEXUS IS250/300, LEXUS IS250/350 and LEXUS IS250C, built from 2004 to 2009. 5 interchangeable part numbers are listed, including DOX-0506, 09SKV110 and 81875.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 8946730030 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Front Right |
| Type | Air Fuel Ratio Sensor |
| Thread | M18x1.5 |
| Cable Length | 260mm |
| Wires | 4 |
OE Cross-Reference
| DOX-0506 | DENSO |
| 09SKV110 | ESEN SKV |
| 81875 | MEAT & DORIA |
| 570338A | ERA |
| 75621 | FAE |
Questions and Answers
Which Toyota and Lexus models does 89467-30030 fit?
Genuine Lexus Oxygen Sensor (Front Right) 89467-30030 is used on LEXUS GS SERIES, LEXUS GS30/35/43/460, LEXUS GS460/430/350, LEXUS IS250/300, LEXUS IS250/350 and LEXUS IS250C, built from 2004 to 2009.
Which OEM part numbers interchange with 89467-30030?
5 interchangeable part numbers are listed for 89467-30030, including DOX-0506 (DENSO), 09SKV110 (ESEN SKV), 81875 (MEAT and DORIA), 570338A (ERA).
How can I verify that 89467-30030 is a genuine Toyota part?
To verify this Oxygen Sensor (Front Right), look for the ten-character number 89467-30030 on the box label together with the country-of-origin marking, then check that the cable entry into the sensor body is sealed by a moulded rubber grommet and the body itself carries the moulded OE number, and that the retail number appears only on the box and the sealed bag, while the sensor body shows only an internal identification code. We can provide the invoice, packing list and CoO for any order.
Where is 89467-30030 installed on the vehicle?
It is fitted in the Front Right position.
How many pieces are needed for 89467-30030?
Supplied as one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
Yes. Disconnect the battery negative terminal first and avoid touching the connector pins.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part earns its price in details that matter over time: the factory-keyed connector plugs straight into your harness with no adapters or rewiring; and the unit is calibrated to the factory signal range, so the ECU reads it without fault codes. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor (Front) 89467-22050 for Toyota Mark X
Oxygen Sensor 89465-0E210 for Toyota Sienna
Oxygen Sensor (Rear Right) 89465-0C190 for Toyota Sequoia
Air Fuel Ratio Sensor 8946A-48080 for Lexus RX Series & RX350
