Oxygen Sensor 89467-28110 for Toyota Previa
8946728110 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| GAC Toyota | $73.94 | Check Better Price |
| Imported Toyota | $81.38 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Product Overview
This is a genuine Toyota OEM oxygen sensor (front), OE 89467-28110, which measures exhaust oxygen or temperature for engine control. It is used on ALPHARD/VELLFIRE/HV, ESTIMA and PREVIA/TARAGO, built from 2006 to 2008. 5 cross-reference numbers apply, including DOX-0501, 234-9042 and ADS77021.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 89467-28110 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Front |
| Type | Air Fuel Ratio Sensor |
| Thread | M18x1.5 |
| Cable Length | 300mm |
| Wires | 4 |
| Connector | 4-pin |
OE Cross-Reference
| DOX-0501 | Denso |
| 234-9042 | NTK |
| ADS77021 | Blue Print |
| J1462012 | Herth+Buss |
| 250-54008 | Walker Products |
Questions and Answers
Which Toyota and Lexus models does 89467-28110 fit?
Genuine Toyota Oxygen Sensor (Front) 89467-28110 is used on ALPHARD/VELLFIRE/HV, ESTIMA and PREVIA/TARAGO, built from 2006 to 2008. Chassis codes include ACR5#, GSR5#, ACR50, GSR50, ANH2#, ATH20, GGH2#.
Which chassis codes does 89467-28110 cover?
Chassis codes include ACR5#, GSR5#, ACR50, GSR50, ANH2#, ATH20, GGH2#.
Which OEM part numbers interchange with 89467-28110?
5 interchangeable part numbers are listed for 89467-28110, including DOX-0501 (Denso), 234-9042 (NTK), ADS77021 (Blue Print), J1462012 (Herth+Buss).
How can I verify that 89467-28110 is a genuine Toyota part?
To verify this Oxygen Sensor (Front), look for the ten-character number 89467-28110 on the box label together with the country-of-origin marking, then check that the cable entry into the sensor body is sealed by a moulded rubber grommet and the body itself carries the moulded OE number, and that the retail number appears only on the box and the sealed bag, while the sensor body shows only an internal identification code. We can provide the invoice, packing list and CoO for any order.
Where is 89467-28110 installed on the vehicle?
It is fitted in the Front position.
How many pieces are needed for 89467-28110?
Supplied as one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
Yes. Disconnect the battery negative terminal first and avoid touching the connector pins.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part earns its price in details that matter over time: the factory-keyed connector plugs straight into your harness with no adapters or rewiring; and the unit is calibrated to the factory signal range, so the ECU reads it without fault codes. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor (Right Rear) 89465-60330 for Toyota FJ CRUISER
Oxygen Sensor (rear) 89465-28400 for Toyota Alphard
Front Oxygen Sensor 89467-12210 for Toyota Corolla
Front Oxygen Sensor 89467-28120 for Toyota Previa
