Front Brake Sub-Pump Pin Rubber Sleeve 47769-48150 for Toyota ALPHARD
4776948150 - Chassis parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $0.18 | Check Better Price |
| GAC Toyota | $0.18 | Check Better Price |
| Imported Toyota | $0.18 | Check Better Price |
| Lexus | $0.18 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 81 mapped vehicle models
More LEXUS RX450HL Parts
Other genuine lexus parts that fit the LEXUS RX450HL platform.
Throttle Body Gasket 22271-31040 for Toyota 4RUNNER
2227131040
Engine Cylinder Head Bolt 90910-02164 for Toyota Alphard
9091002164
Front Bumper Parking Sensor Base 89348-48010 for Lexus RX
8934848010
Hood shock absorber rubber 90541-09069 for Toyota 4RUNNER
9054109069
Spark Plug Gasket 11193-31010 for Toyota ALPHARD
1119331010
Shift mechanism oil seal 90311-12002 for Toyota 4RUNNER
9031112002
Rivet 90269-04051 for Toyota ALPHARD
9026904051
Rear Door Anti-Wear Plate Clip 90467-09206 for Toyota 4RUNNER
9046709206
Product Overview
This is a genuine Lexus OEM front brake sub-pump pin rubber sleeve, OE 47769-48150, which seals the caliper slide pins against dirt. Fits ALPHARD/VELLFIRE, ALPHARD/VELLFIRE/HV, ALPHARD/VELLFIRE/HYBRID, BZ4X (JPP), CROWN CROSSOVER and 350/300H, built from 2006 to 2023. Its construction is recorded as Rubber.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 4776948150 |
| Part Name | Front brake sub-pump pin rubber sleeve |
| Brand | Toyota |
| Position | Front Lower |
| Type | Brake caliper pin bushing |
| Material | Rubber |
| Fitment | Toyota Highlander 2008-2013 (ASU40 GSU4# MHU48), Toyota Crown 2023-, Toyota RAV4 Prime 2022-, Toyota bZ4X 2023 |
Questions and Answers
Which Toyota and Lexus models does 47769-48150 fit?
Genuine Toyota Front Brake Sub-Pump Pin Rubber Sleeve 47769-48150 is used on ALPHARD/VELLFIRE, ALPHARD/VELLFIRE/HV, BZ4X (JPP), CROWN CROSSOVER and 350/300H, built from 2006 to 2023.
How can I verify that 47769-48150 is a genuine Toyota part?
To verify this Front Brake Sub-Pump Pin Rubber Sleeve, look for the ten-character number 47769-48150 on the box label together with the country-of-origin marking, then check that the CV inner boot is moulded with the word Toyoda (spelled with a d) and has four ribs, and that the boot bands are single-use crimp-ear clamps stamped with a diameter and lot code, not screw-type bands. We can provide the invoice, packing list and CoO for any order.
Where is 47769-48150 installed on the vehicle?
It is fitted in the Front Lower position.
How many pieces are needed for 47769-48150?
Supplied as one piece per corner – replace them in pairs (left and right) on the same axle.
Is there anything I need to know before installing this part?
Yes. Fit them as an axle set (both sides at once), bed them in over the first 200 km of light braking, and torque the caliper bolts to the service-manual value – do not reuse the caliper bolts.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part earns its price in details that matter over time: single-use crimp-ear clamps keep the boot greased and sealed for the life of the joint; and What the genuine item buys you is concrete: a factory part number that matches the Toyota catalog entry for the vehicle; and a chemistry line on the data sheet that confirms silicate-free and borate-free inhibitors.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
BUSHING NO. 1 47775-52190 for Toyota ALPHARD
Rear Brake Sub-Pump Pin Rubber Sleeve 47879-33211 for Toyota Camry
Rear Brake Caliper Pin Bushing 47769-50010 for Toyota Alphard
Rear Brake Caliper Slide Pin Boot 47769-22010 for Toyota 4RUNNER
