Rear wheel axle head bearing (left) 42410-0N010 for Toyota Crown
424100N010 - Chassis parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $62.38 | Check Better Price |
| Imported Toyota | $69.15 | Check Better Price |
Replacements
Alternative OE numbers related to this product.
| Brand | Original OE | Replacement OE |
|---|---|---|
| - | 424100N010 | 424100N011 |
Compatible Models
Vehicle models currently mapped to this OE part.
Product Overview
The genuine Toyota rear wheel axle head bearing (left), OE 42410-0N010, carries the wheel bearing and provides the wheel mounting face. Fits CROWN (CHINA) and REIZ, built from 2005 to 2015. The listing carries 2 interchangeable numbers, among them BoltHoleCircle and 424100N011.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 424100N010 |
| Part Name | Axle Shaft Bearing |
| Brand | Toyota |
| Position | Rear |
| Type | Wheel Hub Assembly (Hub & Bearing Assy Rear Axle) |
| Flange Diameter | 154mm |
| Bore Diameter | 33mm |
| Bolt Holes | 5 |
OE Cross-Reference
| Bolt Hole Circle | 114.3mm |
| 424100N011 | Toyota |
Questions and Answers
Which Toyota or Lexus vehicles is 42410-0N010 used on?
42410-0N010 covers CROWN (CHINA) and REIZ, with production years 2005 to 2015. Chassis codes include ARS212, GRS218, GRS18#, GRS20#, UZS200, GRX12#, GRX13#.
Which chassis codes does 42410-0N010 cover?
Chassis codes include ARS212, GRS218, GRS18#, GRS20#, UZS200, GRX12#, GRX13#.
What part numbers replace 42410-0N010?
Listed on this page are 2 interchangeable numbers for 42410-0N010, among them Bolt Hole Circle (114.3mm), 424100N011 (Toyota).
How can I verify that 42410-0N010 is a genuine Toyota part?
To verify this Rear Wheel Axle Head Bearing (Left), look for the ten-character number 42410-0N010 on the box label together with the country-of-origin marking, then check that the part number is die-stamped or laser-etched into the metal itself rather than printed in ink, and it matches the box label, and that the metal carries the supplier’s mark cast or stamped next to Toyota’s own mark, not a separate printed sticker. We can provide the invoice, packing list and CoO for any order.
Where is 42410-0N010 installed on the vehicle?
It is fitted in the Rear position.
How many pieces are needed for 42410-0N010?
Sold as one piece per corner – replace them in pairs (left and right) on the same axle.
Is there anything I need to know before installing this part?
A few points before you fit it: Torque the fasteners with the suspension at ride height and have the alignment checked afterwards.
Is the genuine part worth it compared with an aftermarket equivalent?
What the genuine item buys you is concrete: the part is machined to OE tolerance, so it mounts and seats without shimming or rework; and the OE heat treatment and surface finish help the part resist wear, corrosion and seizing. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Wheel Hub Assembly 43503-69035 for Toyota
Front Axle Head Bearing Left 43560-0N010 for Toyota Crown
Rear Wheel Hub Bearing 42450-60080 for Toyota Land Cruiser
Hub Assembly Grease Cap 90339-03003 for Toyota Coaster, Land Cruiser & Dyna
