O-ring (for fuel injection pump) 90033-01075 for Toyota Dyna
9003301075 - Engine parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $0.84 | Check Better Price |
| GAC Toyota | $0.84 | Check Better Price |
| Imported Toyota | $0.84 | Check Better Price |
| Lexus | $0.84 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 14 mapped vehicle models
More DYNA Parts
Other genuine toyota parts that fit the DYNA platform.
Crankshaft Thrust Washer 11011-30010 for Toyota 4RUNNER
1101130010
Exhaust Manifold Gasket 17173-78080 for Toyota Dyna
1717378080
Pump Seal Gasket 16124-75030 for Toyota 4RUNNER
1612475030
Insurance Chip 90982-09001 for Toyota CELICA
9098209001
Exhaust Pipe Joint Gasket 90917-06078 for Toyota Alphard
9091706078
Shift mechanism oil seal 90311-12002 for Toyota 4RUNNER
9031112002
Rear Door Anti-Wear Plate Clip 90467-09206 for Toyota 4RUNNER
9046709206
Oil Pump Gasket 90301-19021 for Toyota Coaster
9030119021
Product Overview
This is a genuine OEM injection Pump O-ring, OE 90033-01075, which seals an engine accessory housing against oil and coolant seepage. Fits DYNA, DYNA/TOYOACE, DYNA/TOYOACE HV, QUICK DELI/URBAN SUP and COASTER (CHINA), built from 1993 to 2006. It is mounted in the Injection pump position.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 9003301075 |
| Part Name | O-Ring |
| Brand | Toyota |
| Position | Injection pump |
| Type | O-ring (for injection pump) |
Questions and Answers
Which Toyota and Lexus models does 90033-01075 fit?
Genuine Toyota Injection Pump O-Ring 90033-01075 is used on DYNA, DYNA/TOYOACE, DYNA/TOYOACE HV, QUICK DELI/URBAN SUP and COASTER (CHINA), built from 1993 to 2006.
How can I verify that 90033-01075 is a genuine Toyota part?
To verify this Injection Pump O-Ring, look for the ten-character number 90033-01075 on the box label together with the country-of-origin marking, then check that the valve cover gasket is black rubber – a blue gasket in the same job indicates an aftermarket Fel-Pro part, and that formed-in-place sealant is black silicone carrying a Toyota part number, applied instead of a pre-formed gasket at oil pan and timing cover joints. We can provide the invoice, packing list and CoO for any order.
Where is 90033-01075 installed on the vehicle?
It is fitted in the Injection pump position.
How many pieces are needed for 90033-01075?
Supplied as one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
Yes. Clean both mating surfaces and apply the specified sealant in the recommended pattern.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part earns its price in details that matter over time: the number is confirmed against the official Toyota catalog, so the application is exactly right for your chassis; and the part is verified against the OE number before dispatch, so you receive exactly what your chassis requires.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oil Pump Gasket 90301-19021 for Toyota Coaster
Distributor Rubber Ring 90099-14127 for Toyota 4RUNNER
PCV Valve Grommet 90480-18001 for Toyota 4RUNNER
Water Pump Gasket 16124-31070 for Toyota 4RUNNER
