Front Oxygen Sensor 89467-33290 for Toyota Camry
8946733290 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| Imported Toyota | $83.09 | Check Better Price |
| Lexus | $82.79 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 30 mapped vehicle models
More LEXUS ES300H Parts
Other genuine lexus parts that fit the LEXUS ES300H platform.
Water Tank Outlet Pipe 16572-25020 for Toyota Camry
1657225020
Exhaust Pipe Joint Gasket 90917-06078 for Toyota Alphard
9091706078
Rivet 90269-04051 for Toyota ALPHARD
9026904051
Rear Door Anti-Wear Plate Clip 90467-09206 for Toyota 4RUNNER
9046709206
Seal Ring 90301-07037 for Toyota Alphard
9030107037
Half Shaft Nut 90177-22001 for Toyota Alphard
9017722001
Dashboard Housing 90467-07217 for Toyota 4RUNNER
9046707217
O-Ring 90099-14121 for Toyota 4RUNNER
9009914121
Product Overview
The genuine Lexus front oxygen sensor, OE 89467-33290, measures exhaust oxygen or temperature for engine control. It fits CAMRY/HYBRID (ASIA), HARRIER/HARRIER HYBRID (JPP), LEXUS ES300H, LEXUS ES350/300H, LEXUS ES350/300H/260/250/200 and LEXUS NX SERIES (JPP), built from 2017 to 2021. 5 interchangeable part numbers are listed, including DOX-0650, ES21501-12B1 and 250-54125.
Send your OE number or VIN for a wholesale quotation and worldwide shipping.
Technical Specifications
| OE Number | 8946733290 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Front Upper (Upstream) |
| Type | Air Fuel Ratio Sensor |
| Thread | M18x1.5 |
| Cable Length | 540mm |
| Wires | 4 |
OE Cross-Reference
| DOX-0650 | DENSO |
| ES21501-12B1 | DELPHI |
| 250-54125 | WALKER PRODUCTS |
| 811159 | MEAT & DORIA |
| 89467-06250 | TOYOTA |
Questions and Answers
Which Toyota or Lexus vehicles is 89467-33290 used on?
89467-33290 covers CAMRY/HYBRID (ASIA), HARRIER/HARRIER HYBRID (JPP), LEXUS ES350/300H/260/250/200 and LEXUS NX SERIES (JPP), with production years 2017 to 2021.
What part numbers replace 89467-33290?
Listed on this page are 5 interchangeable numbers for 89467-33290, among them DOX-0650 (DENSO), ES21501-12B1 (DELPHI), 250-54125 (WALKER PRODUCTS), 811159 (MEAT and DORIA).
How can I verify that 89467-33290 is a genuine Toyota part?
A genuine Front Oxygen Sensor shows the Toyota number 89467-33290 on the box label with the country-of-origin marking. On the part itself, the retail number appears only on the box and the sealed bag, while the sensor body shows only an internal identification code; and the housing is laser-etched with a deep, sharp part number rather than carrying a printed sticker. Documentation is available on request – commercial invoice, packing list and Certificate of Origin.
Is 89467-33290 a front or rear part?
This part is listed for the Front Upper (Upstream) position.
How many pieces are needed for 89467-33290?
Sold as one piece per position – check the quantity required for your application.
Is the genuine part worth it compared with an aftermarket equivalent?
What the genuine item buys you is concrete: the unit is calibrated to the factory signal range, so the ECU reads it without fault codes; and the factory-keyed connector plugs straight into your harness with no adapters or rewiring. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor 89467-11020 for Toyota Crown
Oxygen Sensor 89467-58030 for Toyota ALPHARD
Oxygen Sensor 89465-33360 for Toyota Camry
Front Oxygen Sensor 89467-0R070 for Toyota E'Z
