Transfer Case Output Shaft Oil Seal 90311-38090 for Toyota Sienna
9031138090 - Chassis parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $2.68 | Check Better Price |
| GAC Toyota | $2.42 | Check Better Price |
| Imported Toyota | $2.64 | Check Better Price |
| Lexus | $2.64 | Check Better Price |
Replacements
Alternative OE numbers related to this product.
| Brand | Original OE | Replacement OE |
|---|---|---|
| - | 9031138090 | 9031138062 |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 80 mapped vehicle models
Product Overview
The genuine Toyota transfer case output shaft oil seal (rear), OE 90311-38090, seals the differential and transfer case against oil loss. It is used on ALPHARD G/V, AVENSIS, BB/OPEN DECK, CALDINA, DYNA and DYNA/TOYOACE, built from 1995 to 2021. 3 cross-reference numbers apply, including 90311-38062, 95IBS-38581111L and 38342-01B00.
Send your OE number or VIN for a wholesale quotation and worldwide shipping.
Technical Specifications
| OE Number | 9031138090 |
| Part Name | Transfer Case Bearing |
| Brand | Toyota |
| Position | Transfer Case Extension Housing (Rear Output) |
| Type | Transmission Oil Seal |
| Bore Diameter | 38mm |
| Outer Diameter | 58mm |
| Width | 11mm |
| Material | NBR |
| Lip Type | TC |
OE Cross-Reference
| 90311-38062 | Toyota |
| 95IBS-38581111L | Febest |
| 38342-01B00 | Nissan |
Questions and Answers
Which Toyota or Lexus vehicles is 90311-38090 used on?
90311-38090 covers ALPHARD G/V, AVENSIS, BB/OPEN DECK, CALDINA, DYNA and DYNA/TOYOACE, with production years 1995 to 2021.
What part numbers replace 90311-38090?
Listed on this page are 3 interchangeable numbers for 90311-38090, among them 90311-38062 (Toyota), 95IBS-38581111L (Febest), 38342-01B00 (Nissan).
What size is 90311-38090?
Measuring 11mm wide, and 58mm outer diameter, this Toyota Transfer Case Output Shaft Oil Seal (Rear) (part number 90311-38090) is a genuine unit. It uses a NBR material.
How can I verify that 90311-38090 is a genuine Toyota part?
A genuine Transfer Case Output Shaft Oil Seal (Rear) shows the Toyota number 90311-38090 on the box label with the country-of-origin marking. On the part itself, formed-in-place sealant is black silicone carrying a Toyota part number, applied instead of a pre-formed gasket at oil pan and timing cover joints; and the valve cover gasket is black rubber – a blue gasket in the same job indicates an aftermarket Fel-Pro part. Documentation is available on request – commercial invoice, packing list and Certificate of Origin.
Is 90311-38090 a front or rear part?
This part is listed for the Transfer Case Extension Housing (Rear Output) position.
How many pieces are needed for 90311-38090?
Sold as one piece per position – check the quantity required for your application.
Is the genuine part worth it compared with an aftermarket equivalent?
What the genuine item buys you is concrete: the part is verified against the OE number before dispatch, so you receive exactly what your chassis requires; and the number is confirmed against the official Toyota catalog, so the application is exactly right for your chassis. These are the aftermarket equivalents you may also see quoted.
What documentation comes with an order?
Each order can ship with the commercial invoice, the packing list and, on request, a Certificate of Origin; the part number is moulded into the rubber, so you can match it against the invoice.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Front Differential Oil Seal 90564-T0008 for Toyota Vios
Transmission Oil Seal Rear 90311-38066 for Toyota DYNA
Front Differential Oil Seal 90564-T0011 for Toyota Vios
Padding 90044-30178 for Toyota Blizzard
