Valve hydraulic tappet adjusting shim 13753-66260 for Toyota Land Cruiser
1375366260 - Engine parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $2.29 | Check Better Price |
| GAC Toyota | $3.65 | Check Better Price |
| Imported Toyota | $3.61 | Check Better Price |
| Lexus | $3.61 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 16 mapped vehicle models
Product Overview
OE 13753-66260 is the genuine Lexus OEM valve hydraulic tappet adjusting shim that spreads the load of the bolt and shields the clamped face. It is used on LEXUS LX450, LAND CRUISER, LAND CRUISER 100 and LAND CRUISER VAN, built from 1990 to 2007. 4 cross-reference numbers apply, including VS055200, 03-0-305310 and WG1156962.
Send your OE number or VIN for a wholesale quotation and worldwide shipping.
Technical Specifications
| OE Number | 1375366260 |
| Part Name | Valve |
| Brand | Toyota |
| Position | Cylinder Head – Valve Train |
| Type | Valve Tappet Adjusting Shim |
| Thickness | 3.10 mm |
| Outer Diameter | 30.5 mm |
| Material | Steel |
| Fitment | Toyota Land Cruiser 80 / 100 / 7x 1992-1997 (1FZFE 3FE) |
OE Cross-Reference
| VS055200 | IPSA |
| 03-0-305310 | METELLI |
| WG1156962 | WILMINK GROUP |
| WG1219185 | WILMINK GROUP |
Questions and Answers
What is the cross-reference for 13753-66260?
4 numbers interchange with 13753-66260, including VS055200 (IPSA), 03-0-305310 (METELLI), WG1156962 (WILMINK GROUP), WG1219185 (WILMINK GROUP).
What size is 13753-66260?
13753-66260 measures 3.10 mm thick, and 30.5 mm outer diameter. It uses a Steel material.
How can I verify that 13753-66260 is a genuine Toyota part?
A genuine Valve Hydraulic Tappet Adjusting Shim shows the Toyota number 13753-66260 on the box label with the country-of-origin marking. On the part itself, the metal carries the supplier’s mark cast or stamped next to Toyota’s own mark, not a separate printed sticker; and the washer outer diameter and hole size match the corresponding Toyota bolt or screw. Documentation is available on request – commercial invoice, packing list and Certificate of Origin.
Is 13753-66260 a front or rear part?
This part is listed for the Cylinder Head – Valve Train position.
How many pieces are needed for 13753-66260?
You get one piece per position – check the quantity required for your application.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part differs in ways that show up in service: the OE heat treatment and surface finish help the part resist wear, corrosion and seizing, and the genuine washer keeps its corrosion-resistant finish through moisture and vibration. These are the aftermarket equivalents you may also see quoted.
What documentation comes with an order?
Commercial invoice and packing list accompany every shipment, and a Certificate of Origin can be issued on request; the part number is die-stamped or laser-etched into the metal, so you can match it against the invoice.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Flat Washer 90564-42081 for Toyota Corolla
Gasket 90564-52059 for Toyota ZELAS
Flat Washer 36265-52140 for Toyota C-HR
Camber Adjusting Shim 90565-15017 for Toyota Hilux