Oxygen Sensor (Front) 89467-0E070 for Toyota Highlander
894670E070 - Electrical components
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| GAC Toyota | $50.10 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
| # | Brand | Model |
|---|---|---|
| 1 | Toyota | Toyota - General area - Highlander: HIGHLANDER (CHINA) - 200905 - 201503 - ASU40,GSU45 |
Product Overview
The genuine Toyota oxygen Sensor (Front), OE 89467-0E070, measures exhaust oxygen or temperature for engine control. It is used on HIGHLANDER (CHINA), built from 2009 onwards. 5 cross-reference numbers apply, including ADT370150, J1462033 and 250-54066.
Send your OE number or VIN for a wholesale quotation and worldwide shipping.
Technical Specifications
| OE Number | 894670E070 |
| Part Name | Oxygen Sensor |
| Brand | Toyota |
| Position | Front |
| Type | Air Fuel Ratio Sensor |
| Thread | M18x1.5 |
| Wires | 4 |
| Length | 247mm |
OE Cross-Reference
| ADT370150 | BLUE PRINT |
| J1462033 | HERTH+BUSS JAKOPARTS |
| 250-54066 | WALKER PRODUCTS |
| F00E263192 | BOSCH |
| EOS9045 | KAVO PARTS |
Questions and Answers
Which Toyota or Lexus models and years does 89467-0E070 cover?
89467-0E070 fits HIGHLANDER (CHINA), built from 2009 onwards. Chassis codes include ASU40, GSU45.
Which chassis codes does 89467-0E070 cover?
Chassis codes include ASU40, GSU45.
What is the cross-reference for 89467-0E070?
5 numbers interchange with 89467-0E070, including ADT370150 (BLUE PRINT), J1462033 (HERTH+BUSS JAKOPARTS), 250-54066 (WALKER PRODUCTS), F00E263192 (BOSCH).
What size is 89467-0E070?
89467-0E070 measures 247mm long.
How can I verify that 89467-0E070 is a genuine Toyota part?
A genuine Oxygen Sensor (Front) shows the Toyota number 89467-0E070 on the box label with the country-of-origin marking. On the part itself, the OE supplier’s mark is moulded or etched on the component next to the Toyota number (DENSO on coils and sensors); and the cable entry into the sensor body is sealed by a moulded rubber grommet and the body itself carries the moulded OE number. Documentation is available on request – commercial invoice, packing list and Certificate of Origin.
Is 89467-0E070 a front or rear part?
This part is listed for the Front position.
How many pieces are needed for 89467-0E070?
You get one piece per position – check the quantity required for your application.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part differs in ways that show up in service: the unit is calibrated to the factory signal range, so the ECU reads it without fault codes, and the factory-keyed connector plugs straight into your harness with no adapters or rewiring. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Oxygen Sensor 89465-0P020 for Toyota Crown
Oxygen Sensor 89467-60030 for Toyota Land Cruiser
Oxygen Sensor 89465-35720 for Lexus GX400
Oxygen Sensor 89465-50210 for Lexus LS460
