Crankshaft Guide Bearing 90363-12018 for Toyota 4RUNNER
9036312018 - Engine parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $1.63 | Check Better Price |
| GAC Toyota | $1.85 | Check Better Price |
| Imported Toyota | $1.76 | Check Better Price |
| Lexus | $1.76 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 50 mapped vehicle models
More DYNA Parts
Other genuine toyota parts that fit the DYNA platform.
Crankshaft Thrust Washer 11011-30010 for Toyota 4RUNNER
1101130010
Exhaust Manifold Gasket 17173-78080 for Toyota Dyna
1717378080
Pump Seal Gasket 16124-75030 for Toyota 4RUNNER
1612475030
Insurance Chip 90982-09001 for Toyota CELICA
9098209001
Exhaust Pipe Joint Gasket 90917-06078 for Toyota Alphard
9091706078
Shift mechanism oil seal 90311-12002 for Toyota 4RUNNER
9031112002
Rear Door Anti-Wear Plate Clip 90467-09206 for Toyota 4RUNNER
9046709206
Oil Pump Gasket 90301-19021 for Toyota Coaster
9030119021
Product Overview
The genuine Toyota crankshaft guide bearing, OE 90363-12018, carries the crankshaft in the engine block. It is used on 4RUNNER, COASTER (CHINA), DYNA, DYNA 200/TOYOACE G25, DYNA/TOYOACE and DYNA200, built from 1988 to 2021. 4 cross-reference numbers apply, including 9036312002, 9009910111 and 9009910116.
Send your OE number or VIN for a wholesale quotation and worldwide shipping.
Technical Specifications
| OE Number | 9036312018 |
| Part Name | Bearing |
| Brand | Toyota |
| Position | Input Shaft |
| Type | Radial Ball Bearing (Pilot / Input Shaft) |
OE Cross-Reference
| 9036312002 | Toyota |
| 9009910111 | Toyota |
| 9009910116 | Toyota |
| 9711006201 | Toyota |
Questions and Answers
Which Toyota or Lexus models and years does 90363-12018 cover?
90363-12018 fits 4RUNNER, COASTER (CHINA), DYNA, DYNA 200/TOYOACE G25 and DYNA/TOYOACE, built from 1988 to 2021.
What is the cross-reference for 90363-12018?
4 numbers interchange with 90363-12018, including 9036312002 (Toyota), 9009910111 (Toyota), 9009910116 (Toyota), 9711006201 (Toyota).
How can I verify that 90363-12018 is a genuine Toyota part?
A genuine Crankshaft Guide Bearing shows the Toyota number 90363-12018 on the box label with the country-of-origin marking. On the part itself, the metal carries the supplier’s mark cast or stamped next to Toyota’s own mark, not a separate printed sticker; and the machined face carries a crisp needle-stamped production code, for example a seven-character dot-peened mark on the shaft head. Documentation is available on request – commercial invoice, packing list and Certificate of Origin.
Is 90363-12018 a front or rear part?
This part is listed for the Input Shaft position.
How many pieces are needed for 90363-12018?
You get one piece per position – check the quantity required for your application.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part differs in ways that show up in service: the OE heat treatment and surface finish help the part resist wear, corrosion and seizing, and the part is machined to OE tolerance, so it mounts and seats without shimming or rework. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Crankshaft Guide Bearing 90363-15017 for Toyota Land Cruiser
Crankshaft Guide Bearing 90363-T0006 for Toyota Fortuner
Crankshaft Pilot Bearing 90363-12024 for Toyota Coaster
Rear Bumper Parking Sensor 89341-33110C1 for Lexus ES240
