Rear Brake Caliper Pin Bushing 47775-22010 for Toyota 4RUNNER
4777522010 - Chassis parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $0.53 | Check Better Price |
| GAC Toyota | $0.62 | Check Better Price |
| Imported Toyota | $0.57 | Check Better Price |
| Lexus | $0.66 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 36 mapped vehicle models
Product Overview
OE 47775-22010 is the genuine Toyota OEM rear brake cylinder pin rubber sleeve (right) that seals the caliper slide pins against dirt. It is used on 4RUNNER, FJ CRUISER, LEXUS GX470, LAND CRUISER, LAND CRUISER 100 and LAND CRUISER S/T,H/T, built from 1990 to 2017. 2 cross-reference numbers apply, including 4777535010 and 0173GRN21PCS2.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 4777522010 |
| Part Name | Rear brake cylinder pin rubber sleeve (right) |
| Brand | Toyota |
| Position | Rear Upper |
| Type | Disc Brake Caliper Pin Boot |
| Weight | 0.005 kg |
| Quantity | 2 |
| Packaging | 10.0 x 10.0 x 2.0 cm |
| Fitment | Toyota 4Runner 2003-2009, Toyota FJ Cruiser 2007-2014, Toyota Sequoia 2001-2007, Toyota Land Cruiser (J7 J8 J9 J10 J12 J15 J20), Toyota Tacoma, Lexus GX (J12), Lexus LX (J2) |
OE Cross-Reference
| 4777535010 | Toyota |
| 0173GRN21PCS2 | Febest |
Questions and Answers
Which Toyota or Lexus models and years does 47775-22010 cover?
47775-22010 fits 4RUNNER, FJ CRUISER, LEXUS GX470, LAND CRUISER, LAND CRUISER 100, LAND CRUISER S/T and H/T, built from 1990 to 2017.
What is the cross-reference for 47775-22010?
2 numbers interchange with 47775-22010, including 4777535010 (Toyota), 0173GRN21PCS2 (Febest).
How can I verify that 47775-22010 is a genuine Toyota part?
To verify this Rear Brake Cylinder Pin Rubber Sleeve (Right), look for the ten-character number 47775-22010 on the box label together with the country-of-origin marking, then check that the CV inner boot is moulded with the word Toyoda (spelled with a d) and has four ribs, and that the boot bands are single-use crimp-ear clamps stamped with a diameter and lot code, not screw-type bands. We can provide the invoice, packing list and CoO for any order.
Where is 47775-22010 installed on the vehicle?
It is fitted in the Rear Upper position.
How many pieces are needed for 47775-22010?
You get one piece per corner – replace them in pairs (left and right) on the same axle.
Is there anything I need to know before installing this part?
Worth knowing first: Fit them as an axle set (both sides at once), bed them in over the first 200 km of light braking, and torque the caliper bolts to the service-manual value – do not reuse the caliper bolts.
Is the genuine part worth it compared with an aftermarket equivalent?
The genuine part differs in ways that show up in service: single-use crimp-ear clamps keep the boot greased and sealed for the life of the joint, and What the genuine item buys you is concrete: a factory part number that matches the Toyota catalog entry for the vehicle; and a chemistry line on the data sheet that confirms silicate-free and borate-free inhibitors. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
BUSHING NO. 1 47775-52190 for Toyota ALPHARD
Rear Brake Sub-Pump Pin Rubber Sleeve 47879-33211 for Toyota Camry
Rear Brake Caliper Slide Pin Boot 4787-533270 for Toyota ALPHARD
Rear Brake Caliper Pin Bushing 47879-48101 for Lexus RX270
