Intake Camshaft Timing Pulley 13050-75010 for Toyota Fortuner
1305075010 - Engine parts
Price Details
Dealer Price ≠ Your Price
Official dealer price is only a benchmark. Your LongTop quote is significantly lower.
| Brand | Longtop Supply Quote | Action |
|---|---|---|
| FAW Toyota | $53.05 | Check Better Price |
| GAC Toyota | $65.85 | Check Better Price |
| Imported Toyota | $77.02 | Check Better Price |
| Lexus | $79.35 | Check Better Price |
Compatible Models
Vehicle models currently mapped to this OE part.
Show all 26 mapped vehicle models
More TACOMA Parts
Other genuine toyota parts that fit the TACOMA platform.
Heater Hose Behind the Water Pump 16268-75131 for Toyota Fortuner
1626875131
Spark Plug Rubber Ring 11193-70010 for Toyota 4RUNNER
1119370010
Pump Seal Gasket 16124-75030 for Toyota 4RUNNER
1612475030
Spark Plug 90919-01191 for Toyota 4RUNNER
9091901191
Spark Plug 90919-01287 for Toyota Fortuner
9091901287
Shift mechanism oil seal 90311-12002 for Toyota 4RUNNER
9031112002
Spark Plug 90919-01192 for Toyota 4RUNNER
9091901192
Rear Door Anti-Wear Plate Clip 90467-09206 for Toyota 4RUNNER
9046709206
Product Overview
OE 13050-75010 is the genuine Toyota OEM intake camshaft timing pulley that drives the timing belt or chain at the correct ratio. It is used on 4RUNNER, DYNA/TOYOACE, FORTUNER, INNOVA/KIJANG INNOVA, TACOMA and LAND CRUISER PRADO, built from 1989 to 2011. The listing carries one interchangeable number: VCP895.
Ask for a wholesale quotation with your VIN or OE number; we ship worldwide.
Technical Specifications
| OE Number | 1305075010 |
| Part Name | Camshaft Timing Pulley |
| Brand | Toyota |
| Position | Camshaft Intake |
| Type | Timing Pulley |
| Outer Diameter | 113.8mm |
OE Cross-Reference
| VCP895 | Gates |
Questions and Answers
Which Toyota or Lexus vehicles is 13050-75010 used on?
13050-75010 covers 4RUNNER, DYNA/TOYOACE, FORTUNER, INNOVA/KIJANG INNOVA, TACOMA and LAND CRUISER PRADO, with production years 1989 to 2011.
What part numbers replace 13050-75010?
Listed on this page are 1 interchangeable numbers for 13050-75010, among them VCP895 (Gates).
What are the dimensions of 13050-75010?
Measuring 113.8mm outer diameter, this Toyota Intake Camshaft Timing Pulley (part number 13050-75010) is a genuine unit.
How can I verify that 13050-75010 is a genuine Toyota part?
To verify this Intake Camshaft Timing Pulley, look for the ten-character number 13050-75010 on the box label together with the country-of-origin marking, then check that the part number is die-stamped or laser-etched into the metal itself rather than printed in ink, and it matches the box label, and that the metal carries the supplier’s mark cast or stamped next to Toyota’s own mark, not a separate printed sticker. We can provide the invoice, packing list and CoO for any order.
Where is 13050-75010 installed on the vehicle?
It is fitted in the Camshaft Intake position.
How many pieces are needed for 13050-75010?
Sold as one piece per position – check the quantity required for your application.
Is there anything I need to know before installing this part?
A few points before you fit it: Compare the number on the part with your invoice before installation, and follow the torque values in the service manual.
Is the genuine part worth it compared with an aftermarket equivalent?
What the genuine item buys you is concrete: the part is machined to OE tolerance, so it mounts and seats without shimming or rework; and the OE heat treatment and surface finish help the part resist wear, corrosion and seizing. These are the aftermarket equivalents you may also see quoted.
FIND THE RIGHT OE PART
Precision in Every Part. Excellence in Every Price.
Typically replies within 10 mins
Recommended Products
Intake Camshaft Timing Pulley 13050-31170 for Toyota ALPHARD
Camshaft Timing Wheel 13524-70050 for Toyota ALTEZZA
Crankshaft Timing Wheel 13521-66020 for Toyota Land Cruiser
Timing Tensioner 13505-20030 for Toyota ALPHARD
